Free compliance, quality & safety checklists
Built to the standards your team actually works under — download any of them free, or build your own in the checklist builder.
NBIS Routine Bridge Inspection
Routine (regular) NBIS bridge inspection documenting NBI condition ratings for deck, superstructure, substructure, and channel per federal requirements.
ADA Public Right-of-Way Accessibility Audit
Field audit of sidewalks, curb ramps, crossings, and pedestrian signals for accessibility compliance in the public right-of-way.
Bridge Seismic Retrofit Component Inspection
Condition inspection of installed seismic retrofit components including restrainers, isolation bearings, column jackets, and shear keys per the FHWA Seismic Retrofitting Manual.
Ferry Terminal & Fender System Inspection
Inspection of ferry/marine terminal berthing structures and fender systems, covering piles, fenders, dolphins, and transfer spans per ASCE waterfront guidance.
Ground-Penetrating Radar Bridge Deck Scan
Non-destructive bridge deck evaluation using ground-penetrating radar to map deterioration, rebar cover, and delamination per ASTM D6087.
Half-Cell Corrosion Potential Survey
Electrochemical corrosion potential mapping of reinforced concrete using a copper-copper sulfate half-cell, with data interpretation per ASTM C876.
Concrete Structure Crack Survey (ACI 224)
Systematic crack mapping and characterization of concrete structures, classifying crack type, width, and cause with durability implications per ACI 224.
Cantilever Mast Arm Traffic Signal Structure Inspection
Structural and fatigue inspection of cantilever mast arm poles supporting traffic signals and luminaires, emphasizing arm-to-pole connections and anchor systems.
Overhead Sign Support Structure Fatigue Inspection
Fatigue-focused inspection of overhead and cantilever sign support structures, targeting connection welds, anchor bolts, and vibration-sensitive details per AASHTO LTS.
Crash Cushion / Impact Attenuator Inspection
Field inspection of impact attenuators and crash cushions verifying MASH acceptance, anchorage, component integrity, and reset readiness after impacts.
High-Tension Cable Median Barrier Inspection
Inspection of high-tension cable median barrier systems verifying cable tension, post condition, anchor terminals, and deflection clearance per MASH and RDG.
Bridge Scour & Scour Countermeasure Inspection
Inspection of bridge scour condition and installed countermeasures (riprap, articulated blocks, guide banks) with channel and foundation assessment per HEC-18/23.
Bridge Steel Coating (Paint) SSPC Inspection
Quality and condition inspection of protective coatings on structural steel, covering surface prep, film thickness, adhesion, and defects per SSPC/AMPP standards.
Wastewater Treatment Plant Asset Inspection
Condition and operational inspection of wastewater treatment plant assets across preliminary, secondary, and solids handling processes to support asset management and permit compliance.
Lift/Pump Station SCADA Inspection
Inspection of wastewater lift and pump stations including pumps, wet well, controls, and SCADA/telemetry systems for reliability, alarms, and safety compliance.
Stormwater Green-Infrastructure BMP Inspection
Inspection and maintenance verification of green-infrastructure stormwater BMPs such as bioretention cells, permeable pavement, bioswales, and green roofs.
Rail Grade Crossing Inspection
Inspection of highway-rail grade crossings covering active warning devices, passive signing, surface condition, sight distance, and roadway geometry.
Detention/Retention Pond Inspection
Routine inspection of stormwater detention and retention (wet) ponds including embankment, outlet works, spillway, sediment storage, and vegetation.
Airfield Pavement Condition (FAA PCI) Inspection
Airfield pavement condition survey using the Pavement Condition Index (PCI) method to document distress type, severity, and extent on runways, taxiways, and aprons.
Runway/Taxiway Lighting Inspection
Inspection of airfield lighting and visual aids including runway/taxiway edge and centerline lights, signs, PAPI/VASI, and constant-current regulator circuits.
Bridge Bearing & Expansion Joint Inspection
Detailed condition assessment of bridge bearings and deck expansion joints, documenting movement, alignment, corrosion, and joint seal integrity.
Bridge Deck Overlay & Waterproofing Inspection
Inspection of bridge deck wearing surfaces, overlays, and membrane waterproofing systems to assess delamination, bonding, and moisture intrusion.
Post-Tensioned / Prestressed Concrete Inspection
Inspection of post-tensioned and prestressed concrete elements focusing on tendon ducts, anchorages, grouting voids, and corrosion of prestressing steel.
Cable-Stayed & Suspension Cable Inspection
Inspection of main cables, stay cables, suspenders, and their anchorages and sheathing on cable-supported bridges, documenting wire condition and corrosion protection.
Roundabout & Traffic-Calming Design Review
Review of roundabout geometry and traffic-calming installations for safety, deflection, sight distance, and accessibility compliance.
Pedestrian Signal & APS Compliance Inspection
Field compliance inspection of pedestrian signal heads and accessible pedestrian signals (APS) for timing, audible/vibrotactile features, and pushbutton placement.
Dynamic Message Sign & ITS Device Field Inspection
Field inspection of dynamic/changeable message signs and roadside ITS devices covering display legibility, communications, structural mounting, and power systems.
MSE Wall / Soil-Nail Wall Inspection
Condition inspection of mechanically stabilized earth (MSE) walls and soil-nail walls, documenting facing distress, alignment, drainage, and global stability indicators.
Rockfall & Slope Stability Assessment
Roadside rock slope and embankment assessment using rockfall hazard rating factors to document slope geometry, geology, ditch effectiveness, and history.
Geotechnical Instrumentation Monitoring
Field monitoring and data-review checklist for geotechnical instrumentation such as inclinometers, piezometers, settlement points, and crack gauges on slopes, walls, and embankments.
Overhead Sign Structure & Truss Inspection
Inspection of overhead sign bridges, cantilevers, and monotube sign supports documenting structural, connection, and fatigue condition of ancillary structures.
Water Main Condition Assessment
Condition assessment of buried potable water transmission and distribution mains documenting leaks, corrosion, break history, and pressure performance.
Sanitary Manhole Inspection (NASSCO MACP)
Level 1/2 manhole condition assessment coding structural and O&M defects from frame through invert per the NASSCO Manhole Assessment Certification Program.
Elevated Water Storage Tank Inspection
Interior and exterior inspection of elevated steel potable water storage tanks documenting coating, structural, sanitary, and safety condition.
USACE Levee Inspection (Routine)
Routine inspection of levee embankments, floodwalls, and appurtenances documenting condition items rated acceptable, minimally acceptable, or unacceptable per USACE.
Parking Structure Condition Inspection
Condition inspection of concrete parking structures documenting deck, connection, and durability distress including corrosion, cracking, and drainage.
Commercial Facade Inspection (NYC Local Law 11/FISP)
Periodic inspection of exterior building walls and appurtenances classifying facade conditions as Safe, Safe With a Repair and Maintenance Program (SWARMP), or Unsafe.
High-Mast & Roadway Lighting Inspection
Inspection of high-mast and roadway lighting poles, foundations, and electrical systems documenting structural, anchorage, and safety condition.
Sidewalk & Curb Ramp Condition Inspection
Condition and accessibility inspection of public sidewalks and curb ramps documenting surface defects, trip hazards, slopes, and detectable warnings.
Sanitary Sewer CCTV Inspection (NASSCO PACP)
CCTV condition assessment of gravity sanitary sewer mains coding structural and O&M defects per the NASSCO Pipeline Assessment Certification Program.
Movable (Bascule/Lift/Swing) Bridge Inspection
Inspection of movable bridge structural, mechanical, and electrical systems documenting operation, balance, and span drive condition.
Fracture-Critical (NSTM) Bridge Inspection
Hands-on inspection of nonredundant steel tension members (fracture-critical members) documenting arm's-length examination of fatigue-prone details and defects.
Underwater & Scour Bridge Inspection
Underwater (dive) inspection of submerged substructure and channel documenting scour, undermining, and foundation condition below the waterline.
Bridge Load Rating Readiness & Data Verification
Verification that a bridge has current, defensible load rating inputs, condition-based capacity factors, and posting where required.
DOT Construction Inspection Daily Report
Daily inspector documentation of contractor activity, materials acceptance, testing, quantities, and safety on a DOT construction project.
IBC Building Code Compliance Inspection
Building code compliance inspection covering structural, egress, fire and life safety, and accessibility provisions of the IBC for a commercial structure.
MS4 Stormwater Outfall & BMP Inspection (NPDES)
Municipal separate storm sewer system inspection of outfalls for illicit discharge and of structural stormwater BMPs for function under the NPDES MS4 permit.
Traffic Signal Field Inspection
Field inspection of a signalized intersection covering signal heads, controller, detection, pedestrian features, and conflict monitoring.
Guardrail & Roadside Barrier Inspection
Inspection of W-beam guardrail, end terminals, transitions, and concrete barrier for damage, height, and crashworthiness compliance.
Culvert & Drainage Structure Inspection
Inspection of culvert barrels, end treatments, and hydraulic performance including scour, joint separation, and material-specific defects.
Retaining Wall & MSE Wall Inspection
Condition inspection of gravity, cantilever, and mechanically stabilized earth (MSE) retaining walls including drainage and global stability signs.
NTIS Highway Tunnel Inspection
Routine highway tunnel inspection covering structural, civil, mechanical, electrical, and life-safety systems per the National Tunnel Inspection Standards.
Dam Safety Inspection (FEMA / USACE)
Periodic dam safety inspection of embankment/concrete structure, spillway, outlet works, and instrumentation with hazard-potential context.
MUTCD Traffic Sign & Retroreflectivity Inspection
Inventory-based inspection of regulatory, warning, and guide signs for condition, placement, and minimum retroreflectivity compliance.
FHWA Element-Level Bridge Inspection (AASHTO Elements)
Element-level bridge inspection assigning quantities to AASHTO condition states (CS1-CS4) for National Bridge Elements and Bridge Management Elements.
PASER Pavement Condition Survey (Asphalt Roads)
Windshield/walking pavement surface evaluation rating asphalt roadway sections on the 1-10 PASER scale with distress documentation.