物业检查指挥中心 18 项
Building Automation System (BAS) & Controls Assessment
此检查清单为英文版。
An assessment of a commercial building automation system evaluating controllers, network architecture, sensors, sequences of operation, and integration with HVAC and life-safety systems to gauge functionality, obsolescence, and energy-performance opportunities.
ASTM E2018ASHRAE Guideline 36ASHRAE 55
免费 PDF 或 Word · 输入邮箱即可下载。
System Architecture and Platform
- What BAS platform and protocol are in use (BACnet, LonWorks, Modbus, proprietary)? *
- Is the front-end workstation or web supervisor operational and accessible? *
- Are controllers and the platform version supported (not end-of-life)? *
- Is the controls network documented with as-built drawings and point lists?
Field Devices and Sensors
- Are field controllers, actuators, and VFDs communicating and responsive? *
- Are temperature, pressure, and flow sensors calibrated and reading plausibly? *
- Are dampers and valves stroking correctly to commanded positions? *
- Are failed points, overrides, or manual positions documented? *
Sequences of Operation and Performance
- Are documented sequences of operation available and being followed?
- Are scheduling, setback, and optimal-start strategies active? *
- Are economizer and demand-control ventilation sequences functioning?
- Are trend logs and alarms configured and reviewed?
Integration and Cybersecurity
- Is the BAS integrated with metering, lighting, or life-safety systems as intended?
- Is remote access secured (VPN, credentials, network segmentation)? *
- Are firmware and software patches reasonably current?
Condition and Recommendations
- What overall BAS condition rating applies (good, fair, poor)? *
- Is partial upgrade, re-commissioning, or full replacement recommended? *
- Are near-term energy or comfort opportunities identified?
下载完整的Building Automation System (BAS) & Controls Assessment检查清单
免费获取排版清晰、便于打印的 PDF，或可编辑的 Word 文档。