품질경영(QMS) 13개 항목
Process Capability (Cp/Cpk) Study Checklist
이 체크리스트는 영어로 제공됩니다.
A checklist for planning and executing a process capability (Cp/Cpk, Pp/Ppk) study on identified special characteristics, verifying data validity and reacting to non-capable processes per IATF 16949 Clause 9.1.1.1.
IATF 16949:2016AIAG SPC
무료 PDF 또는 Word · 이메일을 입력하면 다운로드할 수 있습니다.
Study Planning
- Are the special/critical characteristics requiring capability study identified (e.g., from control plan)? *
- Are the specification limits and target values defined for each characteristic? *
- Has the measurement system been validated (MSA/GR&R acceptable) before the study? *
Data Collection
- Is a sufficient sample size collected (e.g., 25 subgroups / 100+ pieces) under normal production? *
- Is the data collected in rational subgroups over a representative time period? *
- Are the process conditions during data collection representative of normal production? *
Statistical Validity
- Has the process been confirmed to be stable (in statistical control) before assessing capability? *
- Has the data distribution been checked for normality (or an appropriate model applied for non-normal data)? *
- Are Cp/Cpk (capability) and Pp/Ppk (performance) indices distinguished and calculated correctly? *
Results & Reaction
- Are the calculated indices compared against the customer/internal acceptance criteria (e.g., Cpk >= 1.33)? *
- For characteristics that are not capable, is a documented reaction plan (100% inspection/containment) implemented? *
- Is a corrective action initiated to improve non-capable processes toward the required capability? *
- Calculated Cpk value
Process Capability (Cp/Cpk) Study Checklist 체크리스트 전체 다운로드
인쇄하기 좋은 PDF 또는 편집 가능한 Word 문서로 무료로 받으세요.