천연자원 컴플라이언스 15개 항목
Sawmill & Wood Products Safety Inspection Checklist
이 체크리스트는 영어로 제공됩니다.
Inspect a sawmill or wood products facility for occupational safety compliance, covering machine guarding, lockout/tagout, combustible dust, and log-handling hazards.
OSHA 29 CFR 1910.265OSHA 29 CFR 1910 Subpart ONFPA 664OSHA 1910.147
무료 PDF 또는 Word · 이메일을 입력하면 다운로드할 수 있습니다.
Machine Guarding
- Are all saws, edgers, planers, and chippers guarded to prevent contact with blades and nip points? *
- Are exposed portions of headsaws, band saws, and circular saws guarded above and below the table where required? *
- Are anti-kickback devices provided on machines where kickback is a hazard? *
Lockout/Tagout & Energy Control
- Is a documented lockout/tagout program applied to machine servicing and jam clearing? *
- Are employees trained and provided individual locks/tags for hazardous energy control? *
- Are emergency stops accessible and functional on conveyors and processing lines? *
Combustible Wood Dust
- Is a dust collection/housekeeping program in place to prevent accumulation of combustible wood dust? *
- Are ignition sources controlled and electrical equipment rated for the dust environment where required? *
- Are dust collection systems equipped with explosion protection/venting where warranted?
Log & Material Handling
- Are log decks, ponds, and haul roads arranged and operated to prevent rolling-log and crushing hazards? *
- Are mobile equipment operators (forklifts, log loaders) trained and are travel paths separated from pedestrians? *
- Are conveyors guarded at transfer points and equipped with warning devices? *
PPE, Noise & Emergency
- Is a hearing conservation program implemented where noise exposure meets or exceeds the action level? *
- Is required PPE (eye, hearing, foot, cut protection) provided and used? *
- Are fire protection, exits, and emergency procedures in place and communicated? *
Sawmill & Wood Products Safety Inspection Checklist 체크리스트 전체 다운로드
인쇄하기 좋은 PDF 또는 편집 가능한 Word 문서로 무료로 받으세요.