천연자원 컴플라이언스 12개 항목
Pipeline Pigging & Inline Inspection (ILI) Checklist
이 체크리스트는 영어로 제공됩니다.
Verify launch/receive safety, tool run planning, and data validation for cleaning pigs and inline inspection tools used in pipeline integrity management programs.
49 CFR 195.45249 CFR 192.493API STD 1163NACE SP0102
무료 PDF 또는 Word · 이메일을 입력하면 다운로드할 수 있습니다.
Line Preparation & Cleaning
- Has line cleanliness been established with cleaning pig runs before the inline inspection tool is run? *
- Have pipeline diameter changes, tight bends, and valve bore restrictions been verified to pass the selected tool? *
- Is a gauging or geometry pig run performed to confirm passage before the ILI tool? *
Launcher & Receiver Safety
- Is the pig trap depressurized, vented, and drained before the closure is opened? *
- Is the pressure-relieving and interlock system on the trap closure verified operational? *
- Are personnel positioned clear of the trap closure and end-cap discharge path during launch and receipt? *
Tool Run & Tracking
- Was the ILI tool type (MFL, UT, geometry) selected appropriate to the anticipated threats (metal loss, cracking, dents)? *
- Are above-ground markers and tracking used to confirm tool location and velocity during the run? *
- Was flow velocity maintained within the tool's specified operating range? *
Data Validation & Integrity Action
- Was the ILI data validated against known features and verified for adequate coverage and sensor performance? *
- Were reported anomalies assessed against remaining-strength criteria to determine repair or reinspection response? *
- Are dig verifications performed to confirm tool sizing accuracy where warranted? *
Pipeline Pigging & Inline Inspection (ILI) Checklist 체크리스트 전체 다운로드
인쇄하기 좋은 PDF 또는 편집 가능한 Word 문서로 무료로 받으세요.