토목 인프라 점검 20개 항목
High-Mast & Roadway Lighting Inspection
이 체크리스트는 영어로 제공됩니다.
Inspection of high-mast and roadway lighting poles, foundations, and electrical systems documenting structural, anchorage, and safety condition.
AASHTO LTS-6 Standard Specifications for Structural SupportsFHWA High-Mast Tower GuidanceNEC / NFPA 70
무료 PDF 또는 Word · 이메일을 입력하면 다운로드할 수 있습니다.
General & Identification
- Pole/tower type *
- Structure identifier and location *
- Was the previous inspection report reviewed?
- Date of inspection *
Pole & Structure
- Is the pole/shaft free of cracking, denting, corrosion, or section loss? *
- Are welds at the base plate and shaft splices free of cracking? *
- Is the pole plumb and free of excessive lean?
- Are handhole reinforcements and covers intact?
Base, Anchorage & Foundation
- Are anchor bolts, nuts, and leveling nuts present, tight, and free of corrosion? *
- Is the base plate free of cracking and fully bearing? *
- Is the concrete foundation free of cracking, spalling, or undermining? *
- Is the grout/leveling arrangement per detail (not fully grouted where a gap is required)?
Luminaire & Lowering System
- For high-mast towers, does the lowering (ring/winch) system operate correctly?
- Are luminaires, brackets, and arms secure and undamaged? *
- Are wire ropes, connectors, and hoist components free of wear or corrosion?
- Are luminaires functioning (illuminated at night test or lamp check)?
Electrical & Findings
- Is wiring, grounding, and the pole hand-hole splice compartment safe and weather-tight? *
- Are breakers/fuses and the service point in serviceable condition?
- Photograph base, connections, and any defects
- Inspector signature *
High-Mast & Roadway Lighting Inspection 체크리스트 전체 다운로드
인쇄하기 좋은 PDF 또는 편집 가능한 Word 문서로 무료로 받으세요.