Centre de pilotage Inspection immobilière 20 points
EIFS & Stucco Cladding Inspection
Cette liste de contrôle est en anglais.
A moisture-focused condition assessment of exterior insulation and finish systems (EIFS) and traditional cement stucco, evaluating drainage, terminations, sealant joints, and moisture readings at vulnerable penetrations.
ASTM E2128EIMA GuidelinesInterNACHI SOP
PDF ou Word gratuit · saisissez votre e-mail pour le télécharger.
System Identification
- Property address *
- Cladding type *
- Approximate age of the cladding installation (years)
- Weather and surface conditions at time of inspection
Terminations and Clearances
- Cladding maintains proper clearance above grade and hardscape *
- Termination at roof-to-wall, decks, and dissimilar materials is flashed and back-wrapped *
- Weep screed or drainage track is present and unobstructed (drainable systems) *
- Kickout flashing is present at roof-wall intersections *
Penetrations and Sealant Joints
- Windows, doors, and penetrations are sealed with backer rod and compatible sealant *
- No failed, cracked, or missing sealant at penetrations *
- Utility penetrations, lights, and hose bibbs are properly flashed and sealed *
- Expansion joints are present where required by wall length or substrate change
Surface Condition
- No cracking, delamination, bulging, or impact damage in the finish coat *
- No staining, efflorescence, or biological growth indicating moisture intrusion *
- Finish coat adhesion sounds sound (no hollow areas) when tapped
- Photo of representative wall areas and any defect
Moisture Assessment
- Moisture probe reading at highest-risk penetration (% or scale value)
- Elevated moisture detected behind the cladding *
- Recommendation *
- Notes and locations of concern
Téléchargez la liste de contrôle EIFS & Stucco Cladding Inspection complète
Obtenez-la gratuitement en PDF propre et imprimable, ou en document Word modifiable.