simpl.
Войти
Food Safety Command Center Пунктов: 17

Metal Detection & X-Ray CCP Verification Checklist

Этот чек-лист на английском языке.

Verify that metal detection or x-ray inspection is validated, monitored, and controlled as a critical control point for physical hazards.

HACCPGFSIPhysical Hazard Control

Бесплатно в PDF или Word · укажите email, чтобы скачать.

Program & Specification

  • Is metal detection or x-ray defined as a CCP or control point with a documented specification? *
  • Are detection sensitivity standards established for ferrous, non-ferrous, and stainless steel test pieces? *
  • Is the specification justified by validation appropriate to the product and packaging? *
  • Ferrous test piece size (mm)

Performance Testing

  • Are certified test pieces run through the detector at the defined frequency? *
  • Are test pieces passed at the leading, middle, and trailing positions and, for x-ray, across the belt width? *
  • Does each test confirm the unit both detects and rejects the contaminated pack? *
  • Frequency of performance testing (minutes/hours)

Reject & Fail-Safe Verification

  • Is the reject mechanism verified to divert contaminated product into a secure, lockable reject container? *
  • Are fail-safe conditions (belt stop, air failure, reject bin full, power loss) tested to confirm they halt or divert product? *
  • Is the reject confirmation sensor functional where fitted?

Failure Response

  • Is there a documented procedure defining product hold-back when a routine test fails? *
  • Is all product since the last good test quarantined and re-inspected upon a failed check? *
  • Are corrective actions and product disposition recorded? *

Records & Calibration

  • Are performance test results recorded and reviewed by a responsible person? *
  • Is the equipment calibrated/serviced per manufacturer and program requirements? *
  • Date of last equipment service or calibration

Скачайте полный чек-лист «Metal Detection & X-Ray CCP Verification Checklist»

Получите его бесплатно в виде аккуратного PDF для печати или редактируемого документа Word.