Development Command Center 16 butir
Nonstructural Component Seismic Bracing Inspection Checklist
Daftar periksa ini dalam bahasa Inggris.
A special inspection checklist for seismic bracing and anchorage of nonstructural components including MEP, piping, ductwork, and equipment under ASCE 7 Chapter 13.
ASCE 7-22 Ch. 13IBC 2021 Ch. 17NFPA 13ASHRAE/SMACNA Seismic Restraint
PDF atau Word gratis · masukkan email Anda untuk mengunduh.
Design & Requirements
- Are seismic bracing/anchorage calculations and details approved and on site? *
- Is the component importance factor (Ip) and exemption status correctly applied? *
- Is the seismic Design Category and required special inspection identified? *
- Are certificates of compliance provided for designated seismic systems? *
Piping & Ductwork Bracing
- Are transverse and longitudinal braces installed at the required spacing? *
- Is fire sprinkler pipe braced and sway-restrained per the standard? *
- Are brace attachments to structure of the approved type and capacity? *
- Is flexibility/clearance provided at seismic separations and equipment connections? *
Equipment & Component Anchorage
- Is equipment anchored with the specified anchors and embedment? *
- Are vibration-isolated components provided with seismic snubbers/restraints? *
- Are suspended components (light fixtures, ceilings) braced and safety-wired as required? *
- Are storage racks and tanks anchored per the design? *
Verification
- Do installed brace angles and locations match the approved layout? *
- Are post-installed anchors verified per their inspection requirements? *
- Are inspection records and nonconformances documented? *
- Photo of installed seismic bracing and anchorage
Unduh daftar periksa Nonstructural Component Seismic Bracing Inspection Checklist lengkap
Dapatkan secara gratis sebagai PDF yang rapi dan siap cetak atau dokumen Word yang dapat diedit.