Property Inspection Command Center 20 items
Private Well and Septic System Inspection
A combined inspection of a private water well and on-site septic system, evaluating water quality, well construction, tank and drainfield condition per EPA and HUD/USDA guidance.
EPA Private Well GuidanceUSDA/HUD Well & Septic
Free PDF · enter your email to download.
System Details
- Property address *
- Date of inspection *
- Well type *
- Septic system type *
Well Construction and Setbacks
- Well cap is secure, vermin-proof, and above finished grade *
- Well maintains required separation from the septic system and other contamination sources *
- No cross-connections or backflow hazards observed at the well/pressure system *
- Pressure tank and pump cycle normally with acceptable flow rate *
Water Quality
- Water sample collected for bacteriological (total coliform / E. coli) testing *
- Nitrate/nitrite and other required parameters were tested
- Measured static flow/recovery rate meets lender or local minimum
- Water is clear with no unusual odor, color, or sediment at the tap *
Septic Tank
- Tank was located, and access lids/risers were opened for inspection *
- Liquid level is normal (no evidence of backup or leaking tank) *
- Baffles/tees are intact and the tank was pumped/measured for sludge
- Photo of the open tank and access lids
Drainfield / Disposal Area
- No surfacing effluent, wet spots, or sewage odor over the drainfield *
- Drainfield area is free of driveways, structures, or deep-rooted vegetation *
- System accepted a functional flow/dye test without backup
- Summary of findings and recommended maintenance
Download the full Private Well and Septic System Inspection checklist
Get it as a clean, printable PDF — free.